<!-- SPDX-License-Identifier: CC-BY-4.0 -->
# Supplier RFQ — Tunable Snare Frame Array

## Sheet Stock RFQ (Metal Supplier)

> **Request for Quote — Sheet Metal Stock**
>
> Project: Tunable Snare Frame Array — hand-percussion instrument prototype
>
> Please quote supply of:
>
> 1. Cold-rolled steel (CRS), 1.0 mm (20-gauge), hot-dip or pre-oiled:
>    - Quantity: 1× sheet minimum, 300 mm × 900 mm (or next standard size up)
>    - Finish: bare/pre-oiled acceptable; no galvanize
>
> 2. Cold-rolled steel (CRS), 1.5 mm (16-gauge):
>    - Quantity: 1× sheet minimum, 500 mm × 500 mm (or next standard size up)
>    - Finish: bare/pre-oiled acceptable
>
> Delivery to: Maker Nexus, Sunnyvale CA (or local pickup)
> Timeline: No rush; standard lead time acceptable
>
> Contact: [your contact info]

---

## Drum Hardware RFQ (Drum Shop / Online)

> **Parts List for Quote — Drum Hardware**
>
> Project: Custom steel-shell frame drum array prototype (non-production)
>
> 1. Remo Ambassador clear batter heads: 10″ × 1, 8″ × 1, 6″ × 1
> 2. Triple-flange counter-hoops: 10″ × 1, 8″ × 1, 6″ × 1 (match head OD)
> 3. Drum lugs (tension claw, 8-32 thread): 16× total (suggest 2 packs of 8)
> 4. Tension rods (8-32 × 38 mm with washer): 16× total (suggest 3 packs of 6)
> 5. Snare wire assemblies (butt-style with thumb-wheel): 3× (10″, 8″, 6″ or adjust for smallest OD)
>
> Ship to: [your address]
>
> Note: hardware is for a welded steel drum shell prototype; thread specs must match counter-hoop holes. Confirm 8-32 thread compatibility before shipping.