{
  "packet_dir": ".",
  "title": "Wooden Hang Capstone",
  "generated": "2026-05-06",
  "round30_updated": "2026-05-18",
  "readiness": {
    "label": "L1_packet_v5_explorer_candidate",
    "fabrication_authority": "first-pass CAD and design-table artifacts only",
    "build_ready": false,
    "measurement_status": "measurement_required",
    "notes": [
      "Tuned-note, laminate, shell, and resonance claims remain non-authoritative until prototype pitch/decay and cavity-response measurements are logged.",
      "Current SVG and concept image artifacts support packet review; they do not replace CAD, design tables, DXF, measured templates, or reviewed fabrication drawings."
    ]
  },
  "files_included": [
    "README.md",
    "design.md",
    "family-spec.csv",
    "bom.csv",
    "sourcing.csv",
    "cut-list.csv",
    "drawing-brief.md",
    "assembly-manual.md",
    "validation.csv",
    "visual-output-register.csv",
    "visual-bom-brief.md",
    "photo-shotlist.md",
    "risks.md",
    "supplier-rfq.md",
    "wooden-hang-starter.wl",
    "cad/mcp-session-log.md",
    "cad/design-table-inputs.csv",
    "cad/sw-global-variables.csv",
    "cad/wooden_hang_master.scad",
    "cad/SolidWorks-MasterLayout-Plan.md",
    "drawings/wooden-hang-layout.svg",
    "drawings/wooden-hang-section.svg",
    "drawings/tone-field-detail.svg",
    "images/hero-concept.svg",
    "site/index.html",
    "explorer.html"
  ],
  "outputs": {
    "capstone_deck_markdown": "capstone-deck.md",
    "capstone_deck_pptx": "capstone-deck.pptx",
    "print_packet_markdown": "print-packet.md",
    "print_packet_html": "print-packet.html",
    "print_packet_pdf": "print-packet.pdf",
    "design_workbook_xlsx": "Wooden-Hang-Design.xlsx",
    "explorer": "explorer.html"
  },
  "authority_register": "visual-output-register.csv",
  "remaining_unknowns": [
    "Measured pitch and decay for each note field",
    "Laminate and grain-orientation correction factors",
    "Shell or bowl cavity response under real strike conditions",
    "DXF/CAM release geometry and reviewed fabrication drawings",
    "MCP provenance entries for future generated V5 render, diagram, and print assets"
  ],
  "notes": [
    "This packet matches the Mode A root layout used by ceramic-hang.",
    "capstone-deck.pptx was generated with pandoc.",
    "Wooden-Hang-Design.xlsx and print-packet.pdf were generated with local fallback export paths because the typical Python document libraries are not installed in this environment.",
    "Round 30 checked the stash catalog before touching explorer or capstone files; the stashed explorer had a broken GitHub anchor and the stashed manifest referenced a non-existent wooden-hang-starter.wl, so this manifest keeps the tracked artifact set and correct repo-relative paths."
  ]
}